530 mm bore bearings

35 models with a 530 mm (20.866 in) bore across 8 bearing types, outside diameters from 630 to 980 mm. Tables are grouped by type; open a model for full specs and equivalents.

35 models 630–980 mm OD range 2 brands

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
OH-30-530-H OH30 530 630 265 SKF — — —
Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
C39-560-KM-OH39-560-HE carb-adapter-sleeve 530 750 140 SKF open CN 3600
C30-530-KM C3000 530 780 185 SKF open CN 5100
C30-530-M C3000 530 780 185 SKF open CN 5100
C30-560-KM-AOHX30-560 carb-withdrawal-sleeve 530 820 195 SKF open CN 5600
C31-530-KM C3100 530 870 272 SKF open CN 8800
C31-530-M C3100 530 870 272 SKF open CN 8800
Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
NCF18-530-V NCF1800 530 650 56 SKF open CN 990
NCF28-530-V NCF2800 530 650 72 SKF open CN 1400
NCF29-530-V NCF2900 530 710 106 SKF open CN 2700
NUP29-530-ECMA NUP2900 530 710 106 SKF open CN 2380
NU10-530-MA NU1000 530 780 112 SKF open CN 2290
NU20-530-ECMA NU2000 530 780 145 SKF open CN 3740
NCF30-530-V NCF3000 530 780 185 SKF open CN 5230
NU31-530-ECMA-HB1 NU3100 530 870 272 SKF open CN 7480
Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
618-530-MA 61800 530 650 56 SKF open CN 332
619-530-MA 61900 530 710 82 SKF open CN 488
60-530-N1MAS 6000 530 780 112 SKF open CN 650
Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
239-530 23900 530 710 136 NTN open CN 2940
239-530K 23900 530 710 136 NTN open CN 2940
230-530B 23000 530 780 185 NTN open CN 4850
230-530BK 23000 530 780 185 NTN open CN 4850
240-530B 24000 530 780 250 NTN open CN 6200
240-530BK30 24000 530 780 250 NTN open CN 6200
231-530B 23100 530 870 272 NTN open CN 7800
231-530BK 23100 530 870 272 NTN open CN 7800
241-530B 24100 530 870 335 NTN open CN 9250
241-530BK30 24100 530 870 335 NTN open CN 9250
232-530B 23200 530 980 355 NTN open CN 11500
232-530BK 23200 530 980 355 NTN open CN 11500
Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
292-530-EM 29200 530 710 109 SKF open CN 3110
293-530-EM 29300 530 800 160 SKF open CN 5870
294-530-EM 29400 530 920 236 SKF open CN 10500
Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
4130-530UTG 4t-430 530 780 185 NTN open CN 3750
Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
511-530 51100 530 640 85 NTN open CN 645

Exact-dimension interchange groups at 530 mm bore

These d×D×B envelopes at a 530 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:

Selecting a 530 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 530 mm the catalog spans 630–980 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a m6 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 530 mm bore?

This index lists 35 verified bearing models with a 530 mm (20.866 in) bore across 8 bearing types, from 630 to 980 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 630–980 mm OD options for a 530 mm shaft?

On a fixed 530 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 530 mm bearings?

A 530 mm bore on a rotating inner ring normally uses a m6 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). In the ISO designation system 530 mm is bore code 106 (code × 5), so a 62-series bearing with this bore is the 62106.