42 mm bore bearings

17 models with a 42 mm (1.654 in) bore across 2 bearing types, outside diameters from 47 to 72 mm. Tables are grouped by type; open a model for full specs and equivalents.

17 models 47–72 mm OD range 2 brands

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
K42X47X17 K 42 47 17 SKF open CN 20.9
K42X50X20 K 42 50 20 SKF open CN 33.6
NK42-20 NK 42 52 20 SKF open CN 27
NK42-20-XL nk 42 52 20 FAG open CN 30
NK42-30 NK 42 52 30 SKF open CN 39.1
NK42-30-XL nk 42 52 30 FAG open CN 44.5
RNA4907 RNA-49 42 55 20 SKF open CN 31.9
RNA4907-2RS RNA-49 42 55 20 SKF 2RS CN 27
RNA4907-XL rna49 42 55 20 FAG open CN 35.5
RNA6907 RNA-69 42 55 36 SKF open CN 48.4
RNA6907-ZW-XL rna69 42 55 36 FAG open CN 54
NKI42-20 NKI 42 57 20 SKF open CN 29.2
NKI42-20-XL nki 42 57 20 FAG open CN 32.5
NKI42-30 NKI 42 57 30 SKF open CN 41.8
NKI42-30-XL nki 42 57 30 FAG open CN 48.5
Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
RSTO35 rsto 42 72 19.8 FAG open CN 25
RNA2207-2RSR rna22 42 72 22.7 FAG 2RS CN 21.5

Exact-dimension interchange groups at 42 mm bore

These d×D×B envelopes at a 42 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:

Selecting a 42 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 42 mm the catalog spans 47–72 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a k5 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 42 mm bore?

This index lists 17 verified bearing models with a 42 mm (1.654 in) bore across 2 bearing types, from 47 to 72 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 47–72 mm OD options for a 42 mm shaft?

On a fixed 42 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 42 mm bearings?

A 42 mm bore on a rotating inner ring normally uses a k5 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). Bore diameters below 20 mm follow the 10/12/15/17 mm exception table rather than code × 5.