32 mm bore bearings

26 models with a 32 mm (1.260 in) bore across 2 bearing types, outside diameters from 37 to 75 mm. Tables are grouped by type; open a model for full specs and equivalents.

26 models 37–75 mm OD range 3 brands

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
K32X37X13 K 32 37 13 SKF open CN 14.7
K32X37X17 K 32 37 17 SKF open CN 19
K32X38X20 K 32 38 20 SKF open CN 25.1
K32X40X25 K 32 40 25 SKF open CN 35.8
NK32-20-TN NK 32 42 20 SKF open CN 26.4
NK32-20-TV-XL nk 32 42 20 FAG open CN 29.5
NK32-30 NK 32 42 30 SKF open CN 34.1
NK32-30-XL nk 32 42 30 FAG open CN 39
RNA49-28 RNA-49 32 45 17 SKF open CN 25.1
RNA49-28-XL rna49 32 45 17 FAG open CN 27.5
RNA69-28 RNA-69 32 45 30 SKF open CN 39.6
RNA69-28-XL rna69 32 45 30 FAG open CN 45.5
NKI32-20 NKI 32 47 20 SKF open CN 25.1
NKI32-20-XL nki 32 47 20 FAG open CN 28
NKS32 NKS 32 47 22 SKF open CN 34.1
NKS32-XL nks 32 47 22 FAG open CN 38
NKI32-30 NKI 32 47 30 SKF open CN 36.9
NKI32-30-XL nki 32 47 30 FAG open CN 42
NA49-32 NA-49 32 52 20 SKF open CN 30.8
NA49-32-XL na49 32 52 20 FAG open CN 34.5
NA69-32 NA-69 32 52 36 SKF open CN 47.3
NA69-32-ZW-XL na69 32 52 36 FAG open CN 53
Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
320-32 32000 32 58 17 SKF open CN 45.1
320-32X 32000 32 58 17 NTN open CN 41
332-32 33200 32 65 26 NTN open CN 78.5
323-32C 32300 32 75 29.75 NTN open CN 93.5

Selecting a 32 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 32 mm the catalog spans 37–75 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a k5 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 32 mm bore?

This index lists 26 verified bearing models with a 32 mm (1.260 in) bore across 2 bearing types, from 37 to 75 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 37–75 mm OD options for a 32 mm shaft?

On a fixed 32 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 32 mm bearings?

A 32 mm bore on a rotating inner ring normally uses a k5 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). Bore diameters below 20 mm follow the 10/12/15/17 mm exception table rather than code × 5.