18 mm bore bearings
24 models with a 18 mm (0.709 in) bore across 3 bearing types, outside diameters from 24 to 40 mm. Tables are grouped by type; open a model for full specs and equivalents.
24 models 24–40 mm OD range 3 brands
| Model | Series | d (mm) | D (mm) | B (mm) | Brand | Seal | Clearance | C (kN) |
|---|---|---|---|---|---|---|---|---|
| KR-40-B | KR | 18 | 40 | 58 | SKF | open | CN | 10.5 |
| KR-40-PPA | KR | 18 | 40 | 58 | SKF | open | CN | 10.5 |
| KR40 | kr | 18 | 40 | 58 | FAG | open | CN | 10.9 |
| KR40-PP | kr | 18 | 40 | 58 | FAG | 2RS | CN | 10.9 |
| KRE40-PP | kre | 18 | 40 | 58 | FAG | 2RS | CN | 10.9 |
| KRV-40-PPA | KR | 18 | 40 | 58 | SKF | open | CN | 14.2 |
| KRV40-PP | krv | 18 | 40 | 58 | FAG | 2RS | CN | 14.7 |
| NUKR-40-A | NUKR | 18 | 40 | 58 | SKF | open | CN | 19 |
| PWKR-40-2RS | PWKR | 18 | 40 | 58 | SKF | open | CN | 13.8 |
| Model | Series | d (mm) | D (mm) | B (mm) | Brand | Seal | Clearance | C (kN) |
|---|---|---|---|---|---|---|---|---|
| HK1812 | HK | 18 | 24 | 12 | SKF | open | CN | 7.92 |
| HK1812FM | HK | 18 | 24 | 12 | NTN | open | — | 8.3 |
| HK1816 | HK | 18 | 24 | 16 | SKF | open | CN | 11.2 |
| HK1816-2RS | HK | 18 | 24 | 16 | SKF | 2RS | CN | 7.92 |
| HK1816F | HK | 18 | 24 | 16 | NTN | open | — | 11.8 |
| NK18-16 | NK | 18 | 26 | 16 | SKF | open | CN | 12.8 |
| NK18-16-XL | nk | 18 | 26 | 16 | FAG | open | CN | 14.1 |
| NK18-20 | NK | 18 | 26 | 20 | SKF | open | CN | 16.1 |
| NK18-20-XL | nk | 18 | 26 | 20 | FAG | open | CN | 17.9 |
| RNAO18X30X24-ZW-ASR1-XL | rnao | 18 | 30 | 24 | FAG | open | CN | 24.8 |
| RPNA18-32 | RPNA | 18 | 32 | 16 | SKF | open | CN | 12.8 |
| Model | Series | d (mm) | D (mm) | B (mm) | Brand | Seal | Clearance | C (kN) |
|---|---|---|---|---|---|---|---|---|
| NUKR40 | nukr | 18 | 40 | 58 | FAG | open | CN | 18.8 |
| NUKRE40 | nukre | 18 | 40 | 58 | FAG | open | CN | 18.8 |
| PWKR40-2RS-XL | pwkr | 18 | 40 | 58 | FAG | 2RS | CN | 14.3 |
| PWKRE40-2RS-XL | pwkre | 18 | 40 | 58 | FAG | 2RS | CN | 14.3 |
Exact-dimension interchange groups at 18 mm bore
These d×D×B envelopes at a 18 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:
Selecting a 18 mm bore bearing
The bore fixes the shaft, not the bearing capacity. At 18 mm the catalog spans 24–40 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.
For a rotating inner ring a j5 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.
Frequently asked questions
What bearings have a 18 mm bore?
This index lists 24 verified bearing models with a 18 mm (0.709 in) bore across 3 bearing types, from 24 to 40 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.
How do I choose between the 24–40 mm OD options for a 18 mm shaft?
On a fixed 18 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.
What shaft fit and bore code apply to 18 mm bearings?
A 18 mm bore on a rotating inner ring normally uses a j5 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). Bore diameters below 20 mm follow the 10/12/15/17 mm exception table rather than code × 5.