14 mm bore bearings

17 models with a 14 mm (0.551 in) bore across 2 bearing types, outside diameters from 18 to 30 mm. Tables are grouped by type; open a model for full specs and equivalents.

17 models 18–30 mm OD range 3 brands

Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
K14X18X10 K 14 18 10 SKF open CN 6.93
K14X18X13 K 14 18 13 SKF open CN 7.92
K14X18X15-TN K 14 18 15 SKF open CN 9.13
K14X18X17 K 14 18 17 SKF open CN 10.5
HK1412 HK 14 20 12 SKF open CN 6.82
HK1412FM HK 14 20 12 NTN open — 7.2
HK1416F HK 14 20 16 NTN open — 10.3
RNA4900 RNA-49 14 22 13 SKF open CN 8.8
RNA4900-2RS RNA-49 14 22 13 SKF 2RS CN 7.37
RNA4900-XL rna49 14 22 13 FAG open CN 9.6
NK14-16 NK 14 22 16 SKF open CN 10.2
NK14-16-D-XL nk 14 22 16 FAG open CN 15.4
NK14-16-XL nk 14 22 16 FAG open CN 11.4
NK14-20 NK 14 22 20 SKF open CN 12.8
NK14-20-XL nk 14 22 20 FAG open CN 14.5
Model Series d (mm) D (mm) B (mm) Brand Seal Clearance C (kN)
RSTO10 rsto 14 30 11.8 FAG open CN 8.4
RNA2200-2RSR rna22 14 30 13.8 FAG 2RS CN 7

Exact-dimension interchange groups at 14 mm bore

These d×D×B envelopes at a 14 mm bore are shared by several series or brands — the starting point for a dimensional cross reference:

Selecting a 14 mm bore bearing

The bore fixes the shaft, not the bearing capacity. At 14 mm the catalog spans 18–30 mm outside diameter: the light sections suit compact housings and moderate duty, while the larger ODs use bigger rolling elements and carry substantially more load. Select first by the required dynamic load rating C for the calculated L10 life, then by available radial space.

For a rotating inner ring a j5 shaft seat with an H7 housing is the usual starting point; an interference fit plus thermal growth consumes internal clearance, so C3 is the common industrial default rather than CN. Sealed variants (-2RS, -ZZ) trade a small amount of speed for contamination protection and maintenance-free operation — compare the sealed and open versions of the same envelope before substituting one for the other.

Frequently asked questions

What bearings have a 14 mm bore?

This index lists 17 verified bearing models with a 14 mm (0.551 in) bore across 2 bearing types, from 18 to 30 mm outside diameter. Open any model for the full specification table, seal/clearance options and graded cross references.

How do I choose between the 18–30 mm OD options for a 14 mm shaft?

On a fixed 14 mm bore, a smaller outside diameter means a lighter section for limited housing space and moderate load; a larger OD with a wider ring carries more radial and axial load and lasts longer at the same duty. Compare the C dynamic load rating in each model table, then match seal type, internal clearance (CN/C3/C4) and precision class to the actual mounting and operating temperature.

What shaft fit and bore code apply to 14 mm bearings?

A 14 mm bore on a rotating inner ring normally uses a j5 shaft seat with an H7 housing bore (verify against the catalogue for heavy or stationary-ring duty). Bore diameters below 20 mm follow the 10/12/15/17 mm exception table rather than code × 5.