300×460×118 mm bearings
12 models from 3 brands across 4 types share this ISO 15 envelope: 300 mm bore, 460 mm outside diameter, 118 mm width (11.811×18.110×4.646 in), 80 mm radial section.
12 models fit this space 3 brands 12 with catalogue C rating
Dimensional interchange — verify before substituting
These bearings are interchangeable on boundary dimensions per ISO 15 — same bore, OD and width. They are not guaranteed drop-in equivalents: compare load ratings, seals, clearance, cage, precision and axial-locating design for the specific duty. Models without a catalogue C rating on this site carry ISO 15 geometry only; request the manufacturer table before a load-critical replacement.
| Model | Type | Brand | Seal | Clearance | C (kN) | C0 (kN) | Mass (g) |
|---|---|---|---|---|---|---|---|
| 23060 | Spherical Roller | SKF | open | CN | 2219 | 3450 | 71500 |
| 23060-CCK-W33 | Spherical Roller | SKF | open | CN | 2219 | 3450 | 90000 |
| 23060EMD1 | Spherical Roller | NTN | open | CN | 2400 | 3610 | 72900 |
| 23060EMKD1 | Spherical Roller | NTN | open | CN | 2400 | 3610 | 70900 |
| 323060UTG | Tapered Roller | NTN | open | CN | 2070 | 3150 | 69200 |
| 413060UTG | Tapered Roller | NTN | open | CN | 1370 | 1990 | 65600 |
| C3060-KM | CARB Toroidal Roller | SKF | open | CN | 2160 | 3750 | 72000 |
| C3060-M | CARB Toroidal Roller | SKF | open | CN | 2160 | 3750 | 72000 |
| NCF3060-CV | Cylindrical Roller | SKF | open | CN | 1900 | 3250 | 65500 |
| NN3060 | Cylindrical Roller | NTN | open | CN | 1470 | 2560 | 70800 |
| NN3060K | Cylindrical Roller | NTN | open | CN | 1470 | 2560 | 68600 |
| SL183060-TB | Cylindrical Roller | FAG | open | CN | 2020 | 3300 | 66600 |
Substitution verification checklist
- Load rating. Check C (dynamic) and C0 (static) against the original life calculation — the table above shows which models carry verified catalogue values.
- Sealing. Open, -ZZ shields and -2RS contact seals are not equivalent in friction, speed or contamination protection; match the housing environment, not just the suffix on the old box.
- Internal clearance. CN/C3/C4 changes with fit and operating temperature; an interference inner-ring mount commonly needs C3 where the bench bearing ran CN.
- Cage and precision. Stamped steel, machined brass and polymer cages, and P0/P6/P5 tolerance classes, carry different speed and shock limits.
- Locating behaviour. Within one envelope an NU cylindrical roller floats axially while an NJ/NUP locates; ball designs take thrust that roller locating schemes do not. Preserve the shaft's locating arrangement.
Browse all 300 mm bore bearings for wider or narrower sections, or open a model page for naming-rule decode, applications and graded cross references: 23060, 23060-CCK-W33, 23060EMD1, 23060EMKD1, 323060UTG, 413060UTG, C3060-KM, C3060-M, NCF3060-CV, NN3060, NN3060K, SL183060-TB.
Frequently asked questions
Are all 300×460×118 mm bearings interchangeable?
They share the same ISO 15 boundary dimensions — 300 mm bore, 460 mm OD, 118 mm width (11.811×18.110×4.646 in) — so they fit the same shaft, housing bore and axial space. Interchangeability ends at the envelope: dynamic load rating, seal arrangement, internal clearance, cage and precision class differ between the 12 models listed here and must be checked against the duty before substitution.
Is it a drop-in replacement if two bearings both measure 300×460×118?
Only after verification. Confirm five things in order: (1) the C/C0 load ratings meet the original life calculation, (2) the seal type is equivalent or acceptable for the contamination level (open vs -ZZ vs -2RS), (3) internal clearance matches (CN/C3/C4 — an interference fit changes residual play), (4) cage material and precision class suit the speed, and (5) the axial-locating behaviour is the same (for example an NU cylindrical roller floats while an NJ locates one way). Same dimensions alone never guarantee equal performance.
What is 300×460×118 mm in inches?
300×460×118 mm converts to 11.811×18.110×4.646 in, with a 80 mm (3.150 in) radial section height. These are the ISO 15 general-plan envelope dimensions shared across manufacturers, which is why models such as 23060, 23060-CCK-W33, 23060EMD1 mount in the same space despite different internal designs.