200×310×82 mm bearings
12 models from 3 brands across 4 types share this ISO 15 envelope: 200 mm bore, 310 mm outside diameter, 82 mm width (7.874×12.205×3.228 in), 55 mm radial section.
12 models fit this space 3 brands 12 with catalogue C rating
Dimensional interchange — verify before substituting
These bearings are interchangeable on boundary dimensions per ISO 15 — same bore, OD and width. They are not guaranteed drop-in equivalents: compare load ratings, seals, clearance, cage, precision and axial-locating design for the specific duty. Models without a catalogue C rating on this site carry ISO 15 geometry only; request the manufacturer table before a load-critical replacement.
| Model | Type | Brand | Seal | Clearance | C (kN) | C0 (kN) | Mass (g) |
|---|---|---|---|---|---|---|---|
| 23040 | Spherical Roller | SKF | open | CN | 1058 | 1530 | 23500 |
| 23040-CCK-W33 | Spherical Roller | SKF | open | CN | 1058 | 1530 | 31500 |
| 23040EMD1 | Spherical Roller | NTN | open | CN | 1310 | 1790 | 22800 |
| 23040EMKD1 | Spherical Roller | NTN | open | CN | 1310 | 1790 | 22100 |
| 323040UTG | Tapered Roller | NTN | open | CN | 920 | 1320 | 22300 |
| 413040UTG | Tapered Roller | NTN | open | CN | 680 | 940 | 20900 |
| C3040 | CARB Toroidal Roller | SKF | open | CN | 1120 | 1730 | 22500 |
| C3040-K | CARB Toroidal Roller | SKF | open | CN | 1120 | 1730 | 22500 |
| NCF3040-CV | Cylindrical Roller | SKF | open | CN | 913 | 1530 | 22500 |
| NN3040 | Cylindrical Roller | NTN | open | CN | 725 | 1170 | 21600 |
| NN3040K | Cylindrical Roller | NTN | open | CN | 725 | 1170 | 20800 |
| SL183040 | Cylindrical Roller | FAG | open | CN | 950 | 1510 | 21800 |
Substitution verification checklist
- Load rating. Check C (dynamic) and C0 (static) against the original life calculation — the table above shows which models carry verified catalogue values.
- Sealing. Open, -ZZ shields and -2RS contact seals are not equivalent in friction, speed or contamination protection; match the housing environment, not just the suffix on the old box.
- Internal clearance. CN/C3/C4 changes with fit and operating temperature; an interference inner-ring mount commonly needs C3 where the bench bearing ran CN.
- Cage and precision. Stamped steel, machined brass and polymer cages, and P0/P6/P5 tolerance classes, carry different speed and shock limits.
- Locating behaviour. Within one envelope an NU cylindrical roller floats axially while an NJ/NUP locates; ball designs take thrust that roller locating schemes do not. Preserve the shaft's locating arrangement.
Browse all 200 mm bore bearings for wider or narrower sections, or open a model page for naming-rule decode, applications and graded cross references: 23040, 23040-CCK-W33, 23040EMD1, 23040EMKD1, 323040UTG, 413040UTG, C3040, C3040-K, NCF3040-CV, NN3040, NN3040K, SL183040.
Frequently asked questions
Are all 200×310×82 mm bearings interchangeable?
They share the same ISO 15 boundary dimensions — 200 mm bore, 310 mm OD, 82 mm width (7.874×12.205×3.228 in) — so they fit the same shaft, housing bore and axial space. Interchangeability ends at the envelope: dynamic load rating, seal arrangement, internal clearance, cage and precision class differ between the 12 models listed here and must be checked against the duty before substitution.
Is it a drop-in replacement if two bearings both measure 200×310×82?
Only after verification. Confirm five things in order: (1) the C/C0 load ratings meet the original life calculation, (2) the seal type is equivalent or acceptable for the contamination level (open vs -ZZ vs -2RS), (3) internal clearance matches (CN/C3/C4 — an interference fit changes residual play), (4) cage material and precision class suit the speed, and (5) the axial-locating behaviour is the same (for example an NU cylindrical roller floats while an NJ locates one way). Same dimensions alone never guarantee equal performance.
What is 200×310×82 mm in inches?
200×310×82 mm converts to 7.874×12.205×3.228 in, with a 55 mm (2.165 in) radial section height. These are the ISO 15 general-plan envelope dimensions shared across manufacturers, which is why models such as 23040, 23040-CCK-W33, 23040EMD1 mount in the same space despite different internal designs.