160×290×48 mm bearings
20 models from 3 brands across 3 types share this ISO 15 envelope: 160 mm bore, 290 mm outside diameter, 48 mm width (6.299×11.417×1.890 in), 65 mm radial section.
20 models fit this space 3 brands 20 with catalogue C rating
Dimensional interchange — verify before substituting
These bearings are interchangeable on boundary dimensions per ISO 15 — same bore, OD and width. They are not guaranteed drop-in equivalents: compare load ratings, seals, clearance, cage, precision and axial-locating design for the specific duty. Models without a catalogue C rating on this site carry ISO 15 geometry only; request the manufacturer table before a load-critical replacement.
| Model | Type | Brand | Seal | Clearance | C (kN) | C0 (kN) | Mass (g) |
|---|---|---|---|---|---|---|---|
| 6232 | Deep Groove Ball | SKF | open | CN | 186 | 186 | 13000 |
| 6232-M | Deep Groove Ball | SKF | open | CN | 186 | 186 | 14000 |
| 6232-NSK | Deep Groove Ball | NSK | open | CN | 204 | 186 | 12800 |
| 6232-NTN | Deep Groove Ball | NTN | open | CN | 205 | 186 | 11700 |
| 6232-ZZ | Deep Groove Ball | NSK | ZZ | CN | 204 | 186 | 12800 |
| 7232 | Angular Contact Ball | NTN | open | CN | 291 | 305 | 13700 |
| 7232-BCBM | Angular Contact Ball | SKF | open | CN | 255 | 300 | 14000 |
| 7232B | Angular Contact Ball | NTN | open | CN | 263 | 279 | 13700 |
| N232 | Cylindrical Roller | NTN | open | CN | 475 | 570 | 13400 |
| NF232 | Cylindrical Roller | NTN | open | CN | 475 | 570 | 13400 |
| NJ232 | Cylindrical Roller | NTN | open | CN | 475 | 570 | 13400 |
| NJ232-ECML | Cylindrical Roller | SKF | open | CN | 585 | 680 | 14500 |
| NJ232E | Cylindrical Roller | NTN | open | CN | 555 | 665 | — |
| NU232 | Cylindrical Roller | NTN | open | CN | 475 | 570 | 13400 |
| NU232-ECM | Cylindrical Roller | SKF | open | CN | 585 | 680 | 14000 |
| NU232E | Cylindrical Roller | NTN | open | CN | 555 | 665 | — |
| NUP232 | Cylindrical Roller | NTN | open | CN | 475 | 570 | 13400 |
| NUP232-ECM | Cylindrical Roller | SKF | open | CN | 585 | 680 | 15500 |
| NUP232E | Cylindrical Roller | NTN | open | CN | 555 | 665 | — |
| QJ-232-N2MA | Angular Contact Ball | SKF | open | CN | 450 | 670 | 15500 |
Substitution verification checklist
- Load rating. Check C (dynamic) and C0 (static) against the original life calculation — the table above shows which models carry verified catalogue values.
- Sealing. Open, -ZZ shields and -2RS contact seals are not equivalent in friction, speed or contamination protection; match the housing environment, not just the suffix on the old box.
- Internal clearance. CN/C3/C4 changes with fit and operating temperature; an interference inner-ring mount commonly needs C3 where the bench bearing ran CN.
- Cage and precision. Stamped steel, machined brass and polymer cages, and P0/P6/P5 tolerance classes, carry different speed and shock limits.
- Locating behaviour. Within one envelope an NU cylindrical roller floats axially while an NJ/NUP locates; ball designs take thrust that roller locating schemes do not. Preserve the shaft's locating arrangement.
Browse all 160 mm bore bearings for wider or narrower sections, or open a model page for naming-rule decode, applications and graded cross references: 6232, 6232-M, 6232-NSK, 6232-NTN, 6232-ZZ, 7232, 7232-BCBM, 7232B, N232, NF232, NJ232, NJ232-ECML, NJ232E, NU232, NU232-ECM, NU232E, NUP232, NUP232-ECM, NUP232E, QJ-232-N2MA.
Frequently asked questions
Are all 160×290×48 mm bearings interchangeable?
They share the same ISO 15 boundary dimensions — 160 mm bore, 290 mm OD, 48 mm width (6.299×11.417×1.890 in) — so they fit the same shaft, housing bore and axial space. Interchangeability ends at the envelope: dynamic load rating, seal arrangement, internal clearance, cage and precision class differ between the 20 models listed here and must be checked against the duty before substitution.
Is it a drop-in replacement if two bearings both measure 160×290×48?
Only after verification. Confirm five things in order: (1) the C/C0 load ratings meet the original life calculation, (2) the seal type is equivalent or acceptable for the contamination level (open vs -ZZ vs -2RS), (3) internal clearance matches (CN/C3/C4 — an interference fit changes residual play), (4) cage material and precision class suit the speed, and (5) the axial-locating behaviour is the same (for example an NU cylindrical roller floats while an NJ locates one way). Same dimensions alone never guarantee equal performance.
What is 160×290×48 mm in inches?
160×290×48 mm converts to 6.299×11.417×1.890 in, with a 65 mm (2.559 in) radial section height. These are the ISO 15 general-plan envelope dimensions shared across manufacturers, which is why models such as 6232, 6232-M, 6232-NSK mount in the same space despite different internal designs.