130×280×93 mm bearings

21 models from 3 brands across 3 types share this ISO 15 envelope: 130 mm bore, 280 mm outside diameter, 93 mm width (5.118×11.024×3.661 in), 75 mm radial section.

21 models fit this space 3 brands 21 with catalogue C rating

Dimensional interchange — verify before substituting

These bearings are interchangeable on boundary dimensions per ISO 15 — same bore, OD and width. They are not guaranteed drop-in equivalents: compare load ratings, seals, clearance, cage, precision and axial-locating design for the specific duty. Models without a catalogue C rating on this site carry ISO 15 geometry only; request the manufacturer table before a load-critical replacement.

Model Type Brand Seal Clearance C (kN) C0 (kN) Mass (g)
22326 Spherical Roller SKF open CN 1176 1320 29000
22326-CCK-W33 Spherical Roller SKF open CN 1176 1320 33000
22326EAD1 Spherical Roller NTN open CN 1330 1400 27200
22326EAKD1 Spherical Roller NTN open CN 1330 1400 26600
22326EMD1 Spherical Roller NTN open CN 1330 1400 28000
22326EMKD1 Spherical Roller NTN open CN 1330 1400 27500
C2326-K-VE240 CARB Toroidal Roller SKF open CN 980 1220 27000
N2326 Cylindrical Roller NTN open CN 930 1130 26400
NCF2326-ECJB Cylindrical Roller SKF open CN 1120 1340 29000
NJ2326 Cylindrical Roller NTN open CN 930 1130 26400
NJ2326-ECML Cylindrical Roller SKF open CN 1060 1250 29500
NJ2326E Cylindrical Roller NTN open CN 1020 1230 —
NJG2326-VH Cylindrical Roller SKF open CN 1080 1430 28000
NU2326 Cylindrical Roller NTN open CN 930 1130 26400
NU2326-ECML Cylindrical Roller SKF open CN 1060 1250 28500
NU2326E Cylindrical Roller NTN open CN 1020 1230 —
NUH2326-ECMH Cylindrical Roller SKF open CN 1120 1340 28000
NUP2326 Cylindrical Roller NTN open CN 930 1130 26400
NUP2326-ECML Cylindrical Roller SKF open CN 1060 1250 29500
NUP2326E Cylindrical Roller NTN open CN 1020 1230 —
SL192326-TB-XL-BR Cylindrical Roller FAG open CN 1260 1380 27950

Note: catalogue dynamic load ratings for this envelope span 930.0– 1330.0 kN — a 43% spread between designs in the very same 130×280×93 mm space. The higher-rated unit is not an upgrade for every duty (it may run at lower limiting speed), but ignoring the gap will over- or under-life the replacement.

Substitution verification checklist

  1. Load rating. Check C (dynamic) and C0 (static) against the original life calculation — the table above shows which models carry verified catalogue values.
  2. Sealing. Open, -ZZ shields and -2RS contact seals are not equivalent in friction, speed or contamination protection; match the housing environment, not just the suffix on the old box.
  3. Internal clearance. CN/C3/C4 changes with fit and operating temperature; an interference inner-ring mount commonly needs C3 where the bench bearing ran CN.
  4. Cage and precision. Stamped steel, machined brass and polymer cages, and P0/P6/P5 tolerance classes, carry different speed and shock limits.
  5. Locating behaviour. Within one envelope an NU cylindrical roller floats axially while an NJ/NUP locates; ball designs take thrust that roller locating schemes do not. Preserve the shaft's locating arrangement.

Browse all 130 mm bore bearings for wider or narrower sections, or open a model page for naming-rule decode, applications and graded cross references: 22326, 22326-CCK-W33, 22326EAD1, 22326EAKD1, 22326EMD1, 22326EMKD1, C2326-K-VE240, N2326, NCF2326-ECJB, NJ2326, NJ2326-ECML, NJ2326E, NJG2326-VH, NU2326, NU2326-ECML, NU2326E, NUH2326-ECMH, NUP2326, NUP2326-ECML, NUP2326E, SL192326-TB-XL-BR.

Frequently asked questions

Are all 130×280×93 mm bearings interchangeable?

They share the same ISO 15 boundary dimensions — 130 mm bore, 280 mm OD, 93 mm width (5.118×11.024×3.661 in) — so they fit the same shaft, housing bore and axial space. Interchangeability ends at the envelope: dynamic load rating, seal arrangement, internal clearance, cage and precision class differ between the 21 models listed here and must be checked against the duty before substitution.

Is it a drop-in replacement if two bearings both measure 130×280×93?

Only after verification. Confirm five things in order: (1) the C/C0 load ratings meet the original life calculation, (2) the seal type is equivalent or acceptable for the contamination level (open vs -ZZ vs -2RS), (3) internal clearance matches (CN/C3/C4 — an interference fit changes residual play), (4) cage material and precision class suit the speed, and (5) the axial-locating behaviour is the same (for example an NU cylindrical roller floats while an NJ locates one way). Same dimensions alone never guarantee equal performance.

What is 130×280×93 mm in inches?

130×280×93 mm converts to 5.118×11.024×3.661 in, with a 75 mm (2.953 in) radial section height. These are the ISO 15 general-plan envelope dimensions shared across manufacturers, which is why models such as 22326, 22326-CCK-W33, 22326EAD1 mount in the same space despite different internal designs.