6309-M (brass cage) bearing: complete specifications & equivalents

The 6309-M is a ISO 15 radial bearing sized 45 x 100 x 25 mm (bore x OD x width). Verify dimensions against the official catalog before ordering.

Bearing dimension schematic Front view shows outer diameter D and bore d; side section shows width B. D = 100 mm d = 45 B = 25 mm side section front view
Principal dimensions: bore d 45 mm, outer diameter D 100 mm, width B 25 mm. Schematic, not to scale.

Specification table

ParameterValue
Brand SKF
Bore diameter d 45 mm
Outer diameter D 100 mm
Width B 25 mm
Material GCr15
Seal / shield open
Internal clearance CN
Tolerance class P0
Cage brass
Basic dynamic load rating C 55.3 kN
Basic static load rating C0 31.5 kN
Fatigue load limit Pu 1.34 kN
Reference speed (thermal) 15000 rpm
Limiting speed (mechanical) 14000 rpm
Operating temperature -40 to +120 °C
Mass 850 g
Manufacturer designation 6309 M
Standard ISO 15
Catalog version SKF PUB BU/P1 17000/1 EN (Oct 2018)
Last verified 2026-09-27

Source: catalog reference (SKF PUB BU/P1 17000/1 EN (Oct 2018)) · extracted 2026-09-27

Parameters extracted from the official SKF Rolling Bearings catalogue (SKF PUB BU/P1 17000/1 EN (Oct 2018)); SKF® and SKF Explorer® are trademarks of AB SKF, used here for identification only — mpnbase is not an authorized SKF distributor. Boundary dimensions are ISO 15 interchangeable; current production values may differ, verify at skf.com.

Dimensions in inches & 6300-series range

Bore d1.772 in
Outer diameter D3.937 in
Width B0.984 in
ISO bore code09
Radial section height (D−d)/227.5 mm
Smallest bore in 6300-series2 mm
Largest outer diameter in 6300-series500 mm
Width range across 6300-series3–95 mm
Bore position in 6300-series (smallest first)16 of 40
Bore above smallest 6300-series size43 mm

Cross references & equivalents

Equivalent modelBrandMatch levelNote
6309-2RS-NSK NSK full
Dimensions and internal design equivalent — standard interchange.
NSK counterpart NSK 6309DDU on the same 45×100×25 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6309-RSR NSK full
Dimensions and internal design equivalent — standard interchange.
NSK counterpart NSK 6309VV on the same 45×100×25 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6309-ZZ-NSK NSK full
Dimensions and internal design equivalent — standard interchange.
NSK counterpart NSK 6309ZZ on the same 45×100×25 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6309-NSK NSK full
Dimensions and internal design equivalent — standard interchange.
NSK counterpart NSK 6309 on the same 45×100×25 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6309-NTN NTN full
Dimensions and internal design equivalent — standard interchange.
NTN counterpart 6309 on the same 45×100×25 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6309-2RS-NTN NTN full
Dimensions and internal design equivalent — standard interchange.
NTN counterpart 6309LLU on the same 45×100×25 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6309-RSR-NTN NTN full
Dimensions and internal design equivalent — standard interchange.
NTN counterpart 6309LLB on the same 45×100×25 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6309-ZZ-NTN NTN full
Dimensions and internal design equivalent — standard interchange.
NTN counterpart 6309ZZ on the same 45×100×25 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
309 SKF partial
Main dimensions match; tolerances, seals or internal clearance differ.
Same 45×100×25 mm envelope as SKF 309, but catalogue C/C0 differ (55.3/31.5 kN vs 55/44 kN) — envelope match only after a load check.
309-ZZ SKF partial
Main dimensions match; tolerances, seals or internal clearance differ.
Same 45×100×25 mm envelope as SKF 309-2Z, but catalogue C/C0 differ (55.3/31.5 kN vs 55/44 kN) — envelope match only after a load check.
6309 SKF full
Dimensions and internal design equivalent — standard interchange.
SKF SKF 6309 (open arrangement) shares the 45×100×25 mm envelope with ratings within 10 % — execution variant of the same size; boundary dimensions interchangeable.
6309-ZZ SKF full
Dimensions and internal design equivalent — standard interchange.
SKF SKF 6309-2Z (two non-contact shields) shares the 45×100×25 mm envelope with ratings within 10 % — execution variant of the same size; boundary dimensions interchangeable.
6309-2RS SKF full
Dimensions and internal design equivalent — standard interchange.
SKF SKF 6309-2RSH (two contact elastomer seals) shares the 45×100×25 mm envelope with ratings within 10 % — execution variant of the same size; boundary dimensions interchangeable.

Interchange levels: full standard interchange · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the 6309-M model number is decoded

In the 6300-series, the last two digits encode the bore: 6309 carries code 09 = 45 mm (code × 5). The envelope is 45×100×25 mm (1.772×3.937×0.984 in) with a 27.5 mm radial section height, C 55.3 kN, C0 31.5 kN and Pu 1.34 kN. The open 6309 M carries no shields or seals and relies on application lubrication and external sealing. The M suffix identifies the machined brass cage execution, a separate order number from the pressed-steel version. Limiting speed 14000 r/min, catalogue mass 850 g.

Typical equipment & failure modes

Common applications

  • industrial fans
  • compressor drives
  • machine tool auxiliaries
  • agricultural gearboxes

Known failure patterns

  • contamination wear when the open arrangement is used without external seals
  • lubricant starvation where no regreasing interval is maintained
  • raceway smearing under marginal lubrication at start-up
  • electrical pitting in VFD-driven motors without shaft grounding

Selection pitfalls — read before you substitute

  • The fatigue load limit is 1.34 kN; it feeds the equivalent-mean-load check, not the basic life calculation — do not substitute one for the other.
  • Do not preload 6309-M to silence it: a deep-groove ball bearing is not angular-contact, and axial preload only raises temperature and shortens grease life.
  • The M suffix on 6309-M denotes a machined brass cage: it is the choice for high speeds, marginal lubrication and shock/vibration duty, and it is temperature-tolerant where polymer cages are not — the 850 g quoted mass includes the heavier cage.
  • Open 6309-M needs external sealing at the arrangement level; in dusty housings its life depends entirely on those external seals and the regreasing schedule.
  • Plan a relubrication interval for 6309-M; run-to-failure on open deep-groove bearings is the dominant early-failure cause.
  • Fillet radii must clear the 6309-M chamfer so the 25 mm-wide ring seats square; an oversized shaft radius creates point contact on the ring face.
  • SKF Explorer deep-groove bearings of this size are produced to tight internal-geometry control; rating revisions between catalogue years do not change the designation, so keep the catalogue edition with the machine documentation.
  • SKF date-codes its packaging, and greased sealed or shielded bearings carry a finite shelf life: rotate stock first-in-first-out and store boxes dry, cool and away from vibration.

Frequently asked questions

What are the dimensions of 6309-M?

The SKF 6309 M measures 45 mm bore × 100 mm OD × 25 mm width (1.772 × 3.937 × 0.984 in), mass about 850 g. It is open, with no shields or seals.

How does the bore code in 6309 work?

The final two digits of 6309 are bore code 09, multiplied by 5 to give 45 mm.

How long can a greased 6309-M be stored?

Sealed and shielded SKF units carry a finite grease shelf life: SKF recommends first-in-first-out stock rotation and dry, cool, vibration-free storage. Open units ship with rust preventive only and are greased at assembly.

What load can 6309-M take?

Catalogue values for 6309 M: dynamic C 55.3 kN, static C0 31.5 kN, fatigue limit Pu 1.34 kN. Use C in life calculation and C0 for static checks at 45 mm bore.

What is the speed rating of 6309-M?

SKF lists a 15000 r/min thermal reference speed and a 14000 r/min mechanical limiting speed for 6309 M; real limits also depend on lubrication and fits.

Reviewed & verified by the MPN Base engineering desk against source catalog SKF PUB BU/P1 17000/1 EN (Oct 2018) on 2026-09-27. Read our editorial & correction policy.