6219-M (brass cage) bearing: complete specifications & equivalents

The 6219-M is a ISO 15 radial bearing sized 95 x 170 x 32 mm (bore x OD x width). Verify dimensions against the official catalog before ordering.

Bearing dimension schematic Front view shows outer diameter D and bore d; side section shows width B. D = 170 mm d = 95 B = 32 mm side section front view
Principal dimensions: bore d 95 mm, outer diameter D 170 mm, width B 32 mm. Schematic, not to scale.

Specification table

ParameterValue
Brand SKF
Bore diameter d 95 mm
Outer diameter D 170 mm
Width B 32 mm
Material GCr15
Seal / shield open
Internal clearance CN
Tolerance class P0
Cage brass
Basic dynamic load rating C 114 kN
Basic static load rating C0 81.5 kN
Fatigue load limit Pu 3 kN
Reference speed (thermal) 8000 rpm
Limiting speed (mechanical) 5000 rpm
Operating temperature -40 to +120 °C
Mass 3200 g
Manufacturer designation 6219 M
Standard ISO 15
Catalog version SKF PUB BU/P1 17000/1 EN (Oct 2018)
Last verified 2026-09-27

Source: catalog reference (SKF PUB BU/P1 17000/1 EN (Oct 2018)) · extracted 2026-09-27

Parameters extracted from the official SKF Rolling Bearings catalogue (SKF PUB BU/P1 17000/1 EN (Oct 2018)); SKF® and SKF Explorer® are trademarks of AB SKF, used here for identification only — mpnbase is not an authorized SKF distributor. Boundary dimensions are ISO 15 interchangeable; current production values may differ, verify at skf.com.

Dimensions in inches & 6200-series range

Bore d3.74 in
Outer diameter D6.693 in
Width B1.26 in
ISO bore code19
Radial section height (D−d)/237.5 mm
Smallest bore in 6200-series3 mm
Largest outer diameter in 6200-series540 mm
Width range across 6200-series2.5–85 mm
Bore position in 6200-series (smallest first)28 of 45
Bore above smallest 6200-series size92 mm

Cross references & equivalents

Equivalent modelBrandMatch levelNote
6219-2RS-NSK NSK full
Dimensions and internal design equivalent — standard interchange.
NSK counterpart NSK 6219DDU on the same 95×170×32 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6219-RSR NSK full
Dimensions and internal design equivalent — standard interchange.
NSK counterpart NSK 6219VV on the same 95×170×32 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6219-ZZ-NSK NSK full
Dimensions and internal design equivalent — standard interchange.
NSK counterpart NSK 6219ZZ on the same 95×170×32 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6219-NSK NSK full
Dimensions and internal design equivalent — standard interchange.
NSK counterpart NSK 6219 on the same 95×170×32 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6219-NTN NTN full
Dimensions and internal design equivalent — standard interchange.
NTN counterpart 6219 on the same 95×170×32 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6219-2RS-NTN NTN full
Dimensions and internal design equivalent — standard interchange.
NTN counterpart 6219LLU on the same 95×170×32 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6219-RSR-NTN NTN full
Dimensions and internal design equivalent — standard interchange.
NTN counterpart 6219LLB on the same 95×170×32 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
6219-ZZ-NTN NTN full
Dimensions and internal design equivalent — standard interchange.
NTN counterpart 6219ZZ on the same 95×170×32 mm envelope with ratings within 10 % — interchange after checking seal, cage and precision details on both pages.
219 SKF partial
Main dimensions match; tolerances, seals or internal clearance differ.
Same 95×170×32 mm envelope as SKF 219, but catalogue C/C0 differ (114/81.5 kN vs 121/122 kN) — envelope match only after a load check.
219-ZZ SKF partial
Main dimensions match; tolerances, seals or internal clearance differ.
Same 95×170×32 mm envelope as SKF 219-2Z, but catalogue C/C0 differ (114/81.5 kN vs 121/122 kN) — envelope match only after a load check.
6219 SKF full
Dimensions and internal design equivalent — standard interchange.
SKF SKF 6219 (open arrangement) shares the 95×170×32 mm envelope with ratings within 10 % — execution variant of the same size; boundary dimensions interchangeable.
6219-ZZ SKF full
Dimensions and internal design equivalent — standard interchange.
SKF SKF 6219-2Z (two non-contact shields) shares the 95×170×32 mm envelope with ratings within 10 % — execution variant of the same size; boundary dimensions interchangeable.
6219-2RS SKF full
Dimensions and internal design equivalent — standard interchange.
SKF SKF 6219-2RS1 (two contact elastomer seals) shares the 95×170×32 mm envelope with ratings within 10 % — execution variant of the same size; boundary dimensions interchangeable.

Interchange levels: full standard interchange · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

How the 6219-M model number is decoded

In the 6200-series, the last two digits encode the bore: 6219 carries code 19 = 95 mm (code × 5). The envelope is 95×170×32 mm (3.74×6.693×1.26 in) with a 37.5 mm radial section height, C 114 kN, C0 81.5 kN and Pu 3 kN. The open 6219 M carries no shields or seals and relies on application lubrication and external sealing. The M suffix identifies the machined brass cage execution, a separate order number from the pressed-steel version. Limiting speed 5000 r/min, catalogue mass 3200 g.

Typical equipment & failure modes

Common applications

  • centrifugal and positive-displacement pumps
  • material-handling equipment
  • industrial fans
  • compressor drives

Known failure patterns

  • contamination wear when the open arrangement is used without external seals
  • lubricant starvation where no regreasing interval is maintained
  • edge loading from shaft deflection or housing misalignment
  • rolling-contact fatigue spalling once the catalogue L10 life is exceeded

Selection pitfalls — read before you substitute

  • Mount by heating the inner ring (max 120 °C) — driving 6219-M home through the outer ring or balls brinells the raceways.
  • The fatigue load limit is 3 kN; it feeds the equivalent-mean-load check, not the basic life calculation — do not substitute one for the other.
  • The M suffix on 6219-M denotes a machined brass cage: it is the choice for high speeds, marginal lubrication and shock/vibration duty, and it is temperature-tolerant where polymer cages are not — the 3200 g quoted mass includes the heavier cage.
  • Open 6219-M needs external sealing at the arrangement level; in dusty housings its life depends entirely on those external seals and the regreasing schedule.
  • Plan a relubrication interval for 6219-M; run-to-failure on open deep-groove bearings is the dominant early-failure cause.
  • Clearance suffixes follow the seal code in the designation stack (e.g. 6219-2Z/C3 in SKF spelling); no suffix means normal CN internal clearance.
  • A replacement 6219 should go onto inspected seats only: SKF mounting guidance calls for clean, burr-free journals within tolerance, since a large share of early failures traces back to damaged or worn seats.
  • Where two 6219 bearings share one shaft in a preloaded or matched arrangement, order both from the same production lot; catalogue figures describe a single bearing, not a matched set.

Frequently asked questions

What are the dimensions of 6219-M?

The SKF 6219 M measures 95 mm bore × 170 mm OD × 32 mm width (3.74 × 6.693 × 1.26 in), mass about 3200 g. It is open, with no shields or seals.

How does the bore code in 6219 work?

The final two digits of 6219 are bore code 19, multiplied by 5 to give 95 mm.

What load can 6219-M take?

Catalogue values for 6219 M: dynamic C 114 kN, static C0 81.5 kN, fatigue limit Pu 3 kN. Use C in life calculation and C0 for static checks at 95 mm bore.

What is the speed rating of 6219-M?

SKF lists a 8000 r/min thermal reference speed and a 5000 r/min mechanical limiting speed for 6219 M; real limits also depend on lubrication and fits.

What is the difference between 6219-M and a same-bore 62-series bearing?

Section height differs: 6219-M has a 37.5 mm radial section and C 114 kN; always match d, D and B — same bore alone never makes two bearings interchangeable.

Reviewed & verified by the MPN Base engineering desk against source catalog SKF PUB BU/P1 17000/1 EN (Oct 2018) on 2026-09-27. Read our editorial & correction policy.